Contributor: ALL-TEST Pro LLC When a de-energized Motor Circuit Analysis (MCA™) motor testing program is first implemented, it is not unusual to have between 10-30% of the motor systems tested to…
An Ohmmeter is used to measure the electrical resistance between two points. A Micro-ohmmeter is used to measure low resistance circuits. A Meg-Ohmmeter is used to measure high resistance circuits.
For AC Induction motors, winding failures can start and end as turn and coil shorts that do not break through the ground-wall insulation, regardless of the root-cause of the failure.
Power Factor (PF) is a measurement that can quickly determine the amount of load on a motor. Motors are designed to operate between 50 & 100% of rated load.
Authors: Mike Bjorkman, ALL-TEST Pro, LLC, and Stephen Hogue, Less Watts Inc. Unlike residential consumers, industrial and commercial companies are required to pay for the reactive KVA demand power along…
Contributed by ALL-TEST Pro To a technician evaluating a motor, a meg-ohm meter is like a doctor’s blood pressure cuff – in that it’s a measurement you have to take!
Overheating Electric Motors As a general rule of thumb, operating a motor more than 10°C above the motor’s rated insulation class may decrease the life by half.