Skip to content

A Legend Reimagined: Trillium Unveils the Next Evolution of the Roto-Jet® Pump

At TPS 2026, Trillium Flow Technologies introduced the Roto-Jet® VSR Hyper-Drive™, a single-stage pitot tube pump with an integrated direct drive that installs horizontally or vertically in the space an…

Trillium Flow
A Legend Reimagined: Trillium Unveils the Next Evolution of the Roto-Jet® Pump

At TPS 2026, Trillium Flow Technologies introduced the Roto-Jet® VSR Hyper-Drive™, a single-stage pitot tube pump with an integrated direct drive that installs horizontally or vertically in the space an existing pump already occupies.

The sheets came off on September 22 in Houston. On the floor of the 2026 Turbomachinery & Pump Symposia, Trillium Flow Technologies unveiled the Roto-Jet® VSR Hyper-Drive™ in both horizontal and vertical arrangements.

“We found a way to take our Roto-Jet pump, make it smaller, and turn it vertical, which makes it even smaller,” said Eric Tobin, Product Manager, US Pumps, at Trillium. “In fifty years of Roto-Jet, we’ve never had a vertical option before. It’s going to make life easier for customers, and for the people who operate and maintain it.”

That goal, making life easier for the people who run the pump, sums up the design.

The Problem with High Head at Low Flow

Every process plant has a few duties that don’t fit the standard pump catalog. They need a lot of pressure and not much flow. Amine circulation, glycol service, chemical injection, reflux and boosting duties can all fall into that range.

Reaching those heads usually takes one of two approaches: A multistage centrifugal pump stacks impellers until the pressure adds up, or an integrally geared centrifugal pump runs a small impeller at very high speed through a gearbox. Both approaches work, but each carries mechanical overhead. The geared package brings a gear end, a coupling, a lube system and field alignment.

For the maintenance team, that overhead shows up day after day. For the plant engineer, it shows up as a larger footprint and more ways for things to go wrong.

A Legend Reimagined: Trillium Unveils the Next Evolution of the Roto-Jet® Pump

A Pump Built Backward, on Purpose

The Roto-Jet pitot tube pump has taken a different path for decades. Its rotating case design has earned it the nickname “the backward pump.” The rotor spins the fluid, and a stationary pitot tube converts that velocity into static pressure, producing high heads in a single stage.

That architecture brings practical advantages that Roto-Jet users already know. There are no wear rings or close running clearances. No external lube system is needed. Flow is pulsation-free across the entire head-flow curve. And the process seals are exposed only to suction pressure, which extends seal life.

“The advantage with the Roto-Jet is that it’s a very simple machine,” said Simon Bradshaw, Vice President of Engineering at Trillium. “There aren’t a lot of moving components in it. It’s a standard design, and something people are very familiar with. There are lots of places that can fix it and diagnose any issues with it.”

The VSR Hyper-Drive keeps those proven hydraulics. What changes is everything around them.

What’s New: The Missing Parts

The biggest difference in the VSR Hyper-Drive is what’s been taken out. The drive is built into the pump, and the parts that used to sit between the motor and the hydraulics are gone:

  • No external gearbox
  • No flexible couplings
  • No field alignment
  • Fewer mechanical components
  • A smaller installed footprint than the arrangement it replaces

Variable speed also changes how the pump responds when conditions shift. On a pitot tube pump, speed sets pressure. When demand moves because of seasonal swings, feed changes or a bottleneck, operators adjust a setpoint instead of re-rating the pump.

“One of the big things with the VSR Hyper-Drive is the new motor,” said Bryan Voytilla, President of Trillium Pumps USA. “We’re very happy to bring newer technology that’s easy to service to our customer base.”

Roto-Jet VSR Hyper-Drive

US

Metric

Maximum flow

125 gpm

28 m³/hr

Maximum head

4,000 ft

1,200 m

Maximum suction pressure

50–200 psi

3.5–14 bar

Maximum suction temperature

180 °F

82 °C

Maximum suction temperature with flush

250 °F

121 °C

Maximum speed

5,443 rpm

—

Two Orientations, One Footprint

Plants rarely get to design a pump bay from scratch, so the VSR Hyper-Drive comes in two arrangements. Both use the same hydraulics and the same integrated drive. Orientation is a footprint decision, not a performance trade-off.

A Legend Reimagined: Trillium Unveils the Next Evolution of the Roto-Jet® Pump

The horizontal configuration is a compact, low-profile package for skid and baseplate installations. It is sized to drop into existing pump bays without reworking piping runs.

The vertical configuration is base-mounted and saves floor space where plan area is the constraint. In a crowded process area, that can decide whether a plant finds room for a pump or has to build it.

Both are dimensionally matched to common integrally geared centrifugal footprints which opens a retrofit path. The existing unit comes out and the VSR Hyper-Drive goes in, with minimal piping changes, minimal foundation work and no new bay layout. For new builds, the pump can be specified as original equipment from day one, with the drive already integrated and nothing to align in the field.

Who It’s For

The VSR Hyper-Drive is aimed at owners, operators and engineering firms responsible for high-head, low-flow services in oil and gas, refining, petrochemical and chemical processing. It fits especially well in three situations:

  • Aging geared packages. Plants that want to get the gearbox, coupling and alignment out of their maintenance schedule.
  • Space-constrained units. Sites where the vertical arrangement lets a new or replacement pump fit where it otherwise wouldn’t.
  • Moving duty points. Services where variable speed turns a process change into a setpoint adjustment.

Start with the Duty Point

Trillium’s approach to the VSR Hyper-Drive starts with the application. Engineers and buyers are invited to send the flow, the head and the footprint they’re working with. A Trillium application engineer will respond with a configuration and a certified curve.

Specifications, configurations and application contacts are available at trilliumflow.com/product/vsr-hyper-drive.

About Trillium Flow Technologies

Trillium Flow Technologies™ designs and manufactures highly engineered pumps and flow control solutions for critical applications, backed by a portfolio of heritage brands including Roto-Jet®. Learn more at trilliumflow.com.